Hot foil coder

1、 Zebra hot foil coder composition

1. Zebra ribbon is generally composed of five layers, top coating, printing ink layer, inner coating, belt base and back coating.

2. Part of the lead belt of zebra carbon belt is: door handle, front lead belt and rear lead belt.

3. The shaft core of carbon ribbon generally has two kinds of paper and plastic. The key is that it can not be deformed and dragged during printing.

Blue mixed base ribbon

2、 Zebra ribbon specification and model

1. Total width of Foundation (mm): 24, 40, 50, 60, 70, 80, 83, 89, 90, 110131154174220

2. Foundation length (m): 70100, 300450600

3. Winding direction of carbon belt: outer carbon and inner carbon

4. Carbon belt pivot: 1 foot, 1 / 2 foot

3、 Natural environment for storage and transportation of zebra carbon belt:

In order to ensure the best characteristics, please apply, transport and store the carbon belt according to the following natural environment regulations as far as possible

1. Natural environment for storage and transportation: 5 ℃ - 35 ℃, 45% - 85% air humidity

2. Transportation in natural environment: - 5 ℃ - 45 ℃, air humidity of 20% - 85%, and the time shall not exceed one month

3. Storage in natural environment: - 5 ℃ - 40 ℃, storage under the standard of 20% - 85%, three years

4. Please do not immediately expose the carbon belt to the sun and wet and cold natural environment to prevent unnecessary damage to the carbon belt

4、 Ribbon type

（1） Wax based hot foil coder

1. Commodity characteristics: universal label adaptability, good practicability, excellent actual printing effect, cost and economic development, which can be suitable for high-speed printing.

2. Available main uses: the label is applicable to places with short label application time and general specified quality, such as food, department stores, warehouses, train tickets and packaging labels.

3. Available materials: packaging paper, copper paper, double offset paper, etc